Stock availability type: B - small quantities in stock
Introduction
The PRO+ series of NetControl is distinguished by the large number of input-output circuits (total 32 pcs.: open collector outputs and alarm inputs) and the possibility of adding expanders on both sides of the controller (via side slides on the DIN rail). Thus, power circuits (e.g. 220V) are not used in the main controller, but they are moved to the expanders. All input-output circuits are on detachable screw terminals (in groups of 4). All models support "Passive PoE In" - they can be powered with (11-15)VDC through the free pairs of the UTP cable: 4/5='+', 7/8='-'. On request, it is possible to add a DC/DC converter, with which "Passive PoE In" can support 20-100VDC.
Input-output channels in NetControl PRO16OC16A
- 16x "open collector" outputs (14x100mA/30VDC and 2x300mA/60VDC)
- 16x alarm inputs "dry" contact type (8 analog and 8 digital), also compatible with the AC voltage detector VDS300
- Standard expanders Left and Right for connecting additional modules
- Housing made of light gray ABS V0 (self-extinguishing); dimensions 105x65x90mm
Basic functions and network protocols supported
- 10/100 BASE-T Ethernet (Auto MDI/MDIX) with differential overvoltage surge protections
- Supported protocols ARP/DHCP/ICMP/IP/TCP/DNS/SNTP/SNMP/TFTP client/802.1q VLAN
- Configuration and management protocols: HTTP/MQTT/SNMPv1/ModbusTCP/SPC Cloud
- WEB access to all parameters and functions
- SNMPv1 (ONLY snmpget/snmpset) protocol for access to all parameters and functions
- MQTT events and SNMP traps generation on input change
- Flexible user-defined system of sequences of actions (Macros)
- Start of macros on analog input change (Automation)
- Start of Macros on PING lost to 8/24 IP addresses (PING monitor)
- Real-time software clock (RTC) with the ability to start Macros at user-defined time
- "Moving Average" filter for analog inputs
- Manual and impulse mode for outputs with option to store last state in non-volatile memory
- Firmware update via Web/TFTP/SPC Cloud
Applications
- "House/Room Controller" for hotels, guest houses, etc.
- Access control systems with remote control/access over IP
- Automation systems with remote access via the Internet
- IP alarm system, such as panic buttons in hotels or security of telecommunication cabinets.
- restart (automatically in case of PING loss / manually) of network equipment (routers, ADSL modems, servers, etc.)
- general purpose 8 channel relay module with Web/SNMP/MQTT/SPC Cloud/ModbusTCP control
- Remote temperature monitoring systems
Application notes
User manual, specs and SNMP MIB
Latest standard firmware image (also publicly available by TFTP at 84.40.112.77)
This is a standard firmware version that does not contain specific modules, such as ACCESS CONTROL, MBMASTER, etc.!
IMPORTANT! Before updating, please read "FirmwareRevisionHistory.txt" from archive for information on how the new version will affect your current settings!
Software releases with special functions
Please, read the supplied documents before usage!
Firmware "Electricity prices/ModbusMaster MOD"
Firmware "ModbusMaster"