The version is designed for models with Wiegand inputs (xxWG) and has the following innovations:

- Setting "Reverse byte order" of data from Wiegand inputs (for compatibility with different types of readers)

- Uploading a CSV file with codes no longer has a size limit

- Added ability to filter logs via MQTT and by card id, channel and type.

In this version of the standard firmware you will find the following new features: HTTP auto logout - the ability to activate automatic logout of the session after 5 minutes of inactivity (you will be asked for username/password again). Another innovation is the ability to send the status of all outputs with one command (via bitmask) - the function is available via HTTP, MQTT and SNMP!

The brand new concept NetControl PRO+ is available! 

The PRO+ series of NetControl is distinguished by the large number of input-output circuits (total 32 pcs.: open collector outputs and alarm inputs) and the possibility of adding expanders on both sides of the controller (via side slides on the DIN rail). Thus, power circuits (e.g. 220V) are not used in the main controller, but they are moved to the expanders. All input-output circuits are on detachable screw terminals (in groups of 4). All models support "Passive PoE In" - they can be powered with (11-15)VDC through the free pairs of the UTP cable: 4/5='+', 7/8='-'. On request, it is possible to add a DC/DC converter, with which "Passive PoE In" can support 20-100VDC.